Buy ONE DENTURE and get a SPARE DENTURE for FREE

These Are Not Your Grandma's Dentures!

AvaDent dentures are digitally designed and built to look like natural teeth, and the precision fit is so accurate you will forget you are wearing dentures.

It's Just a Better Denture

Translucent, natural looking teeth for your perfect smile  
Patented digital design eliminates your teeth from popping off  
It's bacteria resistant, which reduces denture breath  
Up to 8X stronger than traditional and or printed dentures
You can get you final denture in as few as 2 appointments 
We store your digital records fo easy denture replacement

Complete this Form

We'll connect you with a denture expert

About AvaDent

Dr Wagner and Digital Dentures

Milled Dentures are Better

Denture Strength
Aesthetics
Staining Comparison
Denture Health

Old Fashioned Dentures

Traditional dentures are made from as many as 15 individual pieces that are glued together. This weakens your denture and makes it more likely to crack, chip, or break. Even worse your teeth can pop-off where they were glued in.

AvaDent Dentures

AvaDent is made from a single piece of material, and is up to 8 times stronger than traditional dentures that are glued together. The cracking, chipping, fractures, and pop-offs are a thing of the past with AvaDent.

Old Fashioned Dentures

Traditional dentures have poor chalk like aesthetics making these teeth look unrealistic. Bacteria can grow in gaps around the teeth, causing dark lines and odor.
Old Fashioned Dentures

AvaDent Dentures

With AvaDent dentures the teeth colors are multi-layered like natural teeth. We mimic the translucency of real teeth.  AVaDent dentures do not have any cracks or openings between the tooth and the gums like traditional dentures. This eliminates the small pockets where bacteria grows on traditional and printed dentures.
AvaDent Dentures
The image to the right is half AvaDent one-piece denture and half traditionally processed two piece denture. The left side of the image is the AvaDent  bacteria resistant denture with no bonding and on the right side is a traditional two piece denture with bonded or glued in teeth. In this example we soaked the denture in coffee and wine for two weeks, then we rinsed using only water.

AvaDent Denture

Teeth & Gums are milled from a porosity-free, one-piece puck. There are no tiny holes or gaps where bacteria can attach and grow. 

Traditional Bonded Dentures

Whether it's a traditionally processed or printed denture  you are going to have tiny holes or gaps between the teeth and the gums where bacteria can grow and teeth will stain. 
comparison of a bacteria free AvaDent Denture and a bacteria riddled traditional denture

Old Fashioned Dentures

Traditionally processed dentures have a vast amount of micro-porosity or small holes in the material. These small holes enable yeast and bacteria to grow on your denture causing staining and bad breath.

AvaDent Dentures

AvaDent's patented manufacturing process creates a smooth surface eliminating the tiny surface holes that occur in traditional dentures. When you eliminate these small holes and yeast and bacteria will have a  hard time sticking to your denture and multiplying.

Your Impression Options

We Do It For You

Watch the video above to learn how you can have your denture laser scanned without leaving the comfort of your home. Laser scanning delivers the best fitting denture available today.

Do-It-Yourself

Watch the video above to learn how you can make your own denture impression. This process is a little more difficult than you sending us your denture but we can walk you through it.
Denture Journey - Step 1
Complete our denture survey to see if you qualify for home replacement dentures.
Denture Journey - Step 2
Order online or finance your denture replacement.
Denture Journey - Step 3
Order online or finance your denture replacement.
Denture Journey - Step 4
We send you a box with an overnight pre-paid reutnr label.
Denture Journey - Step 5
You ship us your dentures overnight.
Denture Journey - Step 6
We laser scan your dentures to make your lifetime digital file and FedEx your dentures back to you overnight.
Denture Journey - Step 7
We then custom design your smile and mill your new replacement dentures.
Denture Journey - Step 7
After our doctor and experts complete the quality review and approval process, your new denture will be shipped to you.
Denture Journey - Step 7
Try on your new denture and if it fits like your old one, we will be very happy!  If you don't mind we will follow-up with you just to make sure you're as happy as us.
Everyone receives a digital record of their dentures for easy replacement!
AvaDent Digital Dentures!
Denefits
Ask about our no credit check financing options when you schedule your free virtual consultation. Ask about our no credit check financing options and a real-time monthly payment quote when you schedule your free virtual consultation Monthly payments below may vary with interest rate changes.
CLICK FOR VIRTUAL CONSULTATION

Our Dentists

We have dentists all across the United States who can oversee your denture replacement needs. We even have dentists at our manufacturing facility overlooking your design and the  inspection of your denture before it is shipped. Our support team can direct you to the nearest dentist who offers AvaDent.

Warranty

In the first year, we cover the cost of the denture for any manufacturing defects. We do not cover the cost of the doctors fees.

Financing

Ask your dentist for all available finance plans.
ENTER TO WIN

Our Pricing

Pricing varies, and is dependent on your denture needs. If you have dentures that do not fit, you've lost your denture(s) or you need teeth extracted, you will need to go to one of our highly trained dental practices and receive full treatment which includes impressions for your new dentures. (See pricing in Blue section below). Extractions are a separate fee and not included in the pricing below. 

If you have existing dentures that currently fit we can produce new denture(s) for you by simply laser scanning your existing denture(s) and milling you a replicate denture(s). (See pricing in pink section below).

Buy ONE DENTURE and get a SPARE DENTURE for FREE

Price for replicating a single denture that currently fits with our laser scanning techique

Single Denture
Upper or Lower

$695
Zero Down 
As low as
$36
Per month
24 MONTHS
*Denture's must fit to qualify

Price for replicating a set of dentures that currently fits with our laser scanning technique

Full Dentures
Upper & Lower

$1,295
Zero Down 
As low as
$70
Per month
24 MONTHS
*Denture's must fit to qualify

Premium Affordable Dentures from our Doctors including dental impression technique

Single Denture
Upper or Lower

$2,300 
Zero Down 
As low as
$103
Per month
36 MONTHS

Premium Affordable Dentures from our Doctors  including dental impression technique

Full Dentures
Upper & Lower

$3,600
Zero Down 
As low as
$173
Per month
36 MONTHS

Pricing Table

Detract yet delight written farther his general. If in so bred at dare rose lose good. Feel and make two real.

SINGLE ARCH

$695
ONLY $99 Down
$36 / month for
24 months
Online Consultation
Laser Scan at RefreshaDent Facility
Two Adjustments Appointments
Lifetime Digital Record of Your Denture
High Quality Premium RefreshaDent Denture
All Shipping Included
SELECT

DOUBLE ARCH

$1,295
ONLY $99 Down
$70 / month for
24 months
Online Consultation
Laser Scan at RefreshaDent Facility
Two Adjustments Appointments
Lifetime Digital Record of Your Denture
High Quality Premium RefreshaDent Denture
All Shipping Included
SELECT

SINGLE ARCH

$1,890
ONLY $99 Down
$89 / month for
24 months
Initial Consultation
Oral Exam
$200
Laser Scanning
$190
Two Adjustments Appointments
Lifetime Digital Record of Your Denture
SELECT

SECOND STEP

$68
monthly
Point One
Point Two
Point Three
Point Four
SELECT

THIRD STEP

$98
monthly
Point One
Point Two
Point Three
Point Four
Point Five
SELECT

LAST STEP

$180
monthly
Point One
Point Two
Point Three
Point Four
Point Five
Point Six
SELECT
Save Up To 75% on Your Dentures and Receive a
One-Year Supply of Efferdent® Complete Clean!
Our mission is to make the highest quality denture affordable for everyone.
Efferdent® Complete Clean

Our Gift To YOU

With a every order, get a 12 MONTH SUPPLY of Efferdent® Complete Clean
Efferdent® is the preferred cleaner of Refreshadent Premium Dentures 
LEARN MORE

About AvaDent

Not every mouth contains a set of teeth strong enough to last a lifetime. AvaDent’s philosophy is built on the belief that removable dentures can provide the same comfort as your own teeth and they should be available and affordable for everyone.

The team at AvaDent developed the first digital platform for designing dentures over 13-years ago and have delivered over 350,000 dentures through traditional dental practices. In addition, our team has 80 patents in the design and manufacturing of dentures and we utilize over 70 billion artificial intelligence data points to increase the accuracy of replicating your denture. One of the patents was for the world’s first monolithic (one-piece) denture which took dentures to a new level in strength, cleanliness, and durability. We even retain a digital record of your denture for fast and easy replacement if they are ever lost or damaged.

Give us a try you won’t be disappointed.
AvaDent Digital Dentures
15730 N. 83rd Way #101
Scottsdale, AZ 85260

Frequently Asked Questions

Why choose AvaDent?

We design your denture digitally using state-of-the-art software with over 70 billion AI data points for the utmost inaccuracy. We are registered by the FDA.

Through our unique controlled polymerization and tempering process, we significantly improve the material properties of your denture by eliminating nearly all the free Monomers that can cause irritation in traditional dentures. The material processing produces an ultra-dense, 100% porosity-free, bio-hygienic denture. This helps to reduce bacterial growth and denture breath. It also eliminates the shrinkage that occurs in traditional dentures, so dentures adjustments become a thing of the past. 

We mill your denture from a one-piece monolithic puck using precision instruments backed by computer-aided engineering for optimal fit.  Lastly, our patented puck material is up to eight times stronger than traditional dentures and incorporates multi-layer translucent natural-looking teeth, giving you the smile you deserve..

What happens if I lose my new denture?

When we scan your denture that creates a lifetime digital file, which enables us to reproduce your denture on a moment’s notice. 

What makes AvaDent dentures different?

AvaDent invented digital removable dentistry thirteen years ago and we have perfected how we design and manufacture digital dentures. We have over 80 patents, and we utilize over 70 billion artificial intelligence (AI) data points in our design process. Additionally, we have the only denture that is milled from a single piece of material. Milled dentures from a single piece of denture material are stronger than printed or bonded dentures. We have produced over 350,000 dentures.

What if the denture you send me doesn't fit?

We are duplicating your denture so the fit will be identical to your existing denture. If you are currently not happy with the fit of your denture we recommend you go to one of our dentists for a new denture. They will capture a new impression of your mouth and send us a digital file to create a new custom-fitting denture. 

What's the difference between a printed denture and AvaDent's milled dentures?

Printed dentures have no long-term studies and have some of the same problems as old-fashioned bonded dentures. Labs print the gums or pink base and bond/glue the teeth to the gums. Each bonded tooth is a weak link that can break or pop off. Printed teeth are more porous and susceptible to bacterial growth like old-fashioned dentures and printed teeth do not look anything like natural teeth. In addition, 3D resins for printing dentures are statistically less accurate than a milled denture like AvaDent. The reason is that 3D resins are not fully cured when they are removed from the printing tray. The post-curing process is necessary to more fully polymerize (cure) the material. As an item polymerizes, it shrinks slightly. If the printed material was a perfect sphere, the shrinkage would be uniform and predictable. A denture base is not a sphere and thus unpredictable distortion occurs during the post-curing polymerization. A milled denture has no shrinkage because the puck has been cured in advance of the milling and thus a more accurate fit.

AvaDent is a monolithic denture, which means the entire denture - teeth and gums—is milled simultaneously from a single solid piece of non-porous material without the need to bond multiple teeth. A monolithic denture is stronger as there are no fracture points like bonded teeth. AvaDent's teeth are multi-layered to mimic the translucency of natural teeth.

AvaDent’s patented design offers a permanent prosthesis when esthetics, strength, and cleanliness are needed for both the teeth and base. 

If you have more questions, fill out the form below and we'll contact you.

[gravityform id="16" title="false" description="false" ajax="true" tabindex="49" field_values="check=First Choice,Second Choice"]
suninboxlicenserocket