Date/Time

Location

 AvaDent Digital Dental Solutions LMT Lab Day 2018 Lecture Schedule.

LECTURES WILL BE HELD AT:
The Hyatt Regency • East Tower Bronze Level, Michigan Room 1B
For lecture registration, contact Kent Williams at:
405-226-7866
or email: Kent.Williams@AvaDent.com

Seats Are Limited, Click Here To Register Now!

Friday February 23

8:00am to 9:00am: Israel Finger DDS

9:00am to 10:00am: Scott Keating VP Engineering at AvaDent Digital Dental Solutions

10:00am to 11:00am: Stephen Balshi MBE

11:00am to 12:00pm: Samuel Strong DDS

12:00pm to 1:00pm: Paul Olin DDS and John Madden CDT • The University of Minnesota College of Dentistry Department of Prosthodontics

1:00 pm to 2:00pm: Valerie Cooper DDS MS

2:00pm to 3:00pm: Jeffrey Melton DDS MS

3:00pm to 4:00pm: Javier Ubeda Ortola Application Engineer at NexDent by 3D Systems

4:00 pm to 5:00pm: Brian Goodacre DDS MSD

Saturday February 24

8:00am to 9:00am: Israel Finger DDS

9:00am to 10:00am: Scott Keating VP Engineering at AvaDent Digital Dental Solutions

10:00am to 11:00am: Stephen Balshi MBE

11:00am to 12:00pm: Samuel Strong DDS

12:00pm to 1:00pm: Paul Olin DDS and John Madden CDT •  The University of Minnesota College of Dentistry Department of Prosthodontics

1:00pm to 2:00pm: Valerie Cooper DDS MS

2:00pm to 3:00pm: Jeffrey Melton DDS MS

3:00pm to 4:00pm: Javier Ubeda Ortola Application Engineer at NexDent by 3D Systems

4:00pm to 5:00pm: Stephen Wagner DDS

Seats Are Limited, Click Here To Register Now!

Israel Finger DDS • 8:00am to 9:00am

Bio: Dr. Israel Finger is a practicing prosthodontist in New Orleans, Louisiana. He graduated from Dental school in South Africa and then obtained his Masters degree and certificate in Prosthodontics from The Ohio State University and completed a residency in Maxillo-facial Prosthetics at the Roswell Park Memorial Institute. He was co-coordinator of the graduate program in prosthodontics at Louisiana State University for 28 years. He is an Adjunct faculty member at the Ohio State Dental school He has written and co-authored over 80 publications and has lectured extensively both nationally and internationally. He belongs to different dental organizations and has been involved with the development of a variety of dental products during his dental career.

Title: “The AvaDent Digital Denture: A Revolutionary Technique for Dentures”

 Abstract: CAD/CAM technology has allowed for the first major change in fabricating a denture in decades. Global Dental Science has developed digital technology that has brought the precision, speed and profitability of CAD/CAM technology to removable dentistry. A discussion of clinical techniques utilized for the construction of an AvaDent Digital Denture over the past six years will be presented… AvaDent makes it possible for dentists to offer their patients a precise fitting, esthetic denture in as little as two appointments.

Scott Keating VP Engineering • 9:00am to 10:00am

Bio: Scott is a multi-disciplinary engineer who blends sophisticated software with advanced engineering concepts to create state of the art dental products. Mr. Keating holds engineering degrees in Engineering Science and Mechanics, Structural Engineering and Aerospace Engineering Sciences and has 30 years of experience in computational mechanics and image processing.  Since 1999, Mr. Keating has directed several research and engineering groups, developing production and consumer-facing applications in dental technologies including orthodontics, computed tomography, implant/bar planning and fixed and removable prosthetics.

Title: “AvaDent – A Look Inside the Black Box”

Abstract: Take a look at the inner workings of AvaDent. Discover the history and makeup of the world’s first truly digital denture platform.  The AvaDent System is developed from start to finish with digital dental prostheses in mind.  See how the AvaDent top-down design approach saves you time and leads to successful outcome with beautiful prostheses that fit well and function well.  Get a sneak peek at imminent new AvaDent technologies.

Stephen Balshi MBE • 10:00am to 11:00am

Bio: Stephen Balshi received his undergraduate degree in Biomedical Engineering from the Catholic University of America, Washington, DC. He was awarded a Masters Degree at the School of Biomedical Engineering, Science and Health Systems at Drexel University, Philadelphia, PA with a published thesis on the stability of Brånemark implants and immediate function. He is the President of CM Prosthetics Inc., a laboratory that focuses on the rehabilitation of the fully edentulous, utilizing state-of-the-art CAD/CAM technology. Stephen has produced over 600 digital denture products since getting involved with the technology back in June 2014.

Title: “The Accelerset Prosthesis: The First Fully Automated Unit-Built Implant-Supported Prosthesis Follows the Same Digital Workflow as AvaDent Hybrids and Retreads”

Abstract: Accelerset is the first fully automated unit-built prosthesis.  All parts are milled (framework, crowns, gingiva) and joined together to provide an esthetic implant-supported prosthesis.  Maintenance is easy and the digital record allows for ease of replacement should any fracture occur.

Samuel Strong DDS • 11:00am to 12:00pm

Bio: Dr. Sam Strong is a recognized expert in the field of implant prosthodontics.  He has published widely and lectured nationally and internationally on products and procedures to complete both fixed and removable prostheses for over 20 years.  His lectures and workshops are acclaimed by dentists, lab technicians and dental team members as providing practical information that can be quickly adopted by offices seeking to grow their implant practice. Dr. Strong holds Diplomate status with the International Congress of Oral Implantologists and is an adjunct professor with the University of Arkansas Medical Sciences Department of Oral Health.  He is also one of the first Board Credentialed Members of the Academy of Dental Sleep Medicine. Dr. Strong holds four patents related to products for accurate impressions and centric relation records.  He is the co-developer of the Massad Edentulous and Strong-Massad Denplant Impression Tray Systems.

Title: “Dentures, Overdentures, and All on Four Prosthetics with AvaDent: How and Why We Choose AvaDent Every Time”

Abstract: A description of my journey into the world of scanning, virtual planning, and milling of all our edentulous removable and fixed cases. Dr. Strong will review how AvaDent technology makes his general practice more successful and productive.

Paul Olin DDS and John Madden CDT • 12:00pm to 1:00pm

The University of Minnesota College of Dentistry Department of  Prosthodontics

Bio: Dr. Paul Olin DDS, MS is a graduate of the University of Iowa college of Dentistry. Where he also obtained an MS degree in prosthodontics. He has taught at the University of Minnesota since 1985 where he has held several positions including Director of Prosthodontics, Associate Dean for Clinics. Currently he is the Director of the Dental implant program and the Postgraduate Programs in Esthetic Dentistry Levels I-III. He maintains an active intramural practice and continuing education presentations and workshops. His research and publications are related to prosthodontics and implant dentistry.

Bio: John Madden CDT while pursuing a B.A. in psychology, John worked in the lab at the University of Minnesota School of Dentistry. There, he developed a passion for dental technology and decided to pursue becoming a CDT. As a trained removable technician and digital dentistry enthusiast, he quickly adapted to the world of digital dentures and has become a primary resource for many in Minnesota on the subject.  He focuses on adopting digital dentistry techniques in the institutional setting and finding solutions for clinics where institutional lag is problematic.  He also runs a small lab and consulting company, John Madden Prosthetics, where he helps former students develop modern production strategies.

Title: “Making the transition from pack and press to Scan, Digitize and Mill; an Institutional Perspective”

Abstract: This presentation will review the transition from traditional denture fabrication to the AvaDent milled digital denture utilizing the Wagner Try-in at a University Dental School. Both the clinician and the laboratory technician will share their experiences helping you to incorporate milled AvaDent Digital Dentures into your offerings.

Valerie Cooper DDS MS • 1:00 pm to 2:00pm

Bio: Dr. Cooper is a private practice prosthodontist with a passion for dentures. Called the “Denture Queen” by her prosthodontics co-residents, the name stuck, and her love for removable prosthodontics grew with time. Dr. Cooper presents a systematic approach to digital denture treatment which she has been refining since she switched to all-digital denture fabrication in 2015. Dr. Cooper’s practices are located in Dayton, Ohio, her hometown. She owns a practice limited to prosthodontics as well as a general dentistry practice. Since 2013 Dr. Cooper has fabricated free dentures for patients in her community during National Prosthodontics Awareness Week (NPAW). Many volunteer lab technicians, students, and prosthodontists helped prepare up to 20 dentures in a single week with the conventional denture process. Once the process became all digital and required less human work, the focus turned to education during NPAW 2016 and 2017.

Dr. Cooper’s prosthodontics training and Master of Science in Dentistry was completed at The Ohio State University in 2009. She received her Doctor of Dental Surgery degree at The Ohio State University in 2006. Dr. Cooper was selected for Omicron Kappa Upsilon dental honor society, as well as received several awards for general clinical and academic excellence. Her undergraduate degree is a Bachelor of Science in Biology, also from The Ohio State University, 2002. Research also has been an interest of Dr. Cooper. She began as a student research assistant in a lab which studied the genetics of cleft lip and palate. As a prosthodontics student she completed a human research study in dietary and microbial analysis of adults with rampant caries. Currently, she is a member of the American College of Prosthodontics, American Dental Association, and serves on the board of directors for the Dayton Dental Society

Title: “Digital Dentures for the Tech Savy Dentist and Laboratory: Intraoral Scanning, Printing, and Accelerated Workflows”

Abstract: Digital dentures naturally appeal to the tech savy dentist and laboratory, but many doctors are still asking “how to start?”. Dr. Cooper has provided hundreds of patients with digital dentures and is continually pursuing new technology. She shares her advanced workflow ideas for dentists who demand to use intraoral scanners, 3D printing, and reduced appointments. Dental laboratories need to help guide doctors who wish to work with advanced techniques. The tech savy dentist is ideal suited for and ready to start making digital dentures. This session is for those interested in learning how to make dentures unlike ever before. 

Jeffrey Melton DDS MS • 2:00pm to 3:00pm

Bio: After earning his DDS from Baylor College of Dentistry, his Biology and Chemistry degree from the University of New Mexico, and his Periodontal degree from the University of Texas Health Science Center at San Antonio, Dr. Jeffrey Melton brought his clinical skills and compassionate care to New Mexico.

While at Baylor Dental School he received the Pre-Doctoral Achievement Award from the International College of Implantology. Subsequently, he was the first graduate student accepted into a 5-year residency in a double degree of Graduate Periodontology and Graduate Prosthodontics. He also received a Master of Science Degree from the Graduate School of Biomedical Sciences, UT San Antonio.

Dr. Melton is a member in good standing with many prestigious dental organizations, including the American Dental Association, American College of Prosthodontists, American Academy of Periodontology, American Board of Periodontology, New Mexico Dental Association, Santa Fe District Dental Society and Southwest Academy of Restorative Dentistry. He is President of the Santa Fe District Dental Society, and a diplomate of the American Board of Periodontology.

Title: “AvaDent from a Surgical/Restorative Perspective: Utilizing a Digital Workflow to Achieve More Predictable Results for Completely”

Edentulous Patients”

Abstract: Great progress has been made in digital dentures over the past 5+ years. With a carefully planned digital workflow we can take patients through immediate dentures to a final fixed or removable implant supported prosthesis in less than half the chair time while achieving a more predictable long-term outcome.   This presentation will review contemporary techniques in which the Laboratory, Restorative Dentist, and Surgeon can collaborate to enhance patient treatment. Additionally, we will explore the many benefits of this digital workflow process.

Mr. Javier Ubeda Ortola • 3:00pm to 4:00pm

Application Support Engineer NexDent by 3D Systems

Bio: Javier has been a Dental Technician since 1993 when he earned his degree in Barcelona, Spain. Until 2015 he was the Owner of NC Dental Laboratory in Valencia, Spain; where he specialized in removable and overdenture creation and manufacturing. For the past 9-years he has been responsible for and worked as the Official Trainer for VerTex Dental. Javier currently works as an Application Support Engineer at NexDent Dental and 3D Systems.

Title: “NextDent, the Global Leader in Dental 3D Printing Materials Presents How you can Take Immediate Advantage of the Many Amazing 3D Printing Opportunities in your Dental Laboratory Today”

Abstract:  The dynamic world of 3D printing is being fueled by rapid technological advances.  NextDent has teamed up with AvaDent Digital Dental Solutions to bring you an exciting 3D printing innovation and many opportunities for your lab:

• -Do’s and Don’ts for 3D printing
• -3D printing materials/applications
• -3D printing systems (Open vs. Closed)
• -Post 3D printing processing (including light boxes)
• -3D in-lab printing using AvaDent “SHARE” print files
• -The future of 3D printing in-lab

Brian Goodacre DDS MSD • Friday 4:00 pm to 5:00pm

 Bio: Dr. Brian J. Goodacre received his DDS degree from Loma Linda University School of Dentistry in 2013. He completed a four-and-a-half-year combined program in Prosthodontics and Implant Dentistry at Loma Linda University School of Dentistry in 2017, earning an MSD degree. He is currently an assistant professor at Loma Linda University School of Dentistry.

Title: “From Impression to Complete Denture – A Workflow for a Completely Digital Denture”

Abstract: Finally, an all-digital workflow for dentures, created without the use of physical impressions during the first clinical visit. The technique combines intraoral scanning, anatomical measurements and an esthetic try-in to successfully produce a complete denture in 3 appointments. The digitization of the entire denture process offers many benefits which will be explored in the lecture.

Stephen Wagner DDS • Saturday 4:00 pm to 5:00pm

 Bio: Dr. Stephen Wagner, a Diplomate of the American Board of Prosthodontics and a Fellow of the Academy of Maxillofacial Prosthetics, the American College of Prosthodontists and Academy of Prosthodontics is currently in his 40th year of private practice in Albuquerque, New Mexico. He received his dental degree from the University of Southern California School of Dentistry and his prosthodontic training from MD Anderson Hospital in Houston, Texas.

Dr. Wagner serves on the Review Board of the International Journal of Oral and Maxillofacial Implants, is Editor of the ACP Board Preparation APP, and was recently presented with the American College of Prosthodontists’ 2014 Private Practitioner of the Year Award. He currently sits on the Board of Directors for both the ACP and AAMP. Dental images taken by Dr. Wagner have been used by the New York Times, ABC News, The Discovery Channel, Newsweek, and The American Dental Association in the Journal of the American Dental Association, ADA educational pamphlets, and on the ADA web site.

Title: “Digital Dentures: The State of the Art in 2018”

Abstract: Following completion of the presentation, the participant should have knowledge of the following:

1.  Contemporary digital clinical and laboratory workflows used to construct a complete removable denture for the edentulous patient.
2.  A three appointment clinical technique for fabricating a digitally fabricated denture
3.  A one appointment impression technique for making a final denture impression.
4.  How implants are incorporated into the AvaDent Digital Denture workflow.

Seats Are Limited, Click Here To Register Now!