AvaDent Digital Dentures are machined from a specially crafted acrylic puck. These unique pucks are produced industrially under much higher pressure than that used in a traditional injection process. This gives you and your patients many advantages:
No shrinkage of the material during manufacturing and the possibility to add the patient’s natural palatine structure.
With AvaDent XCL the denture becomes up to 8 times stronger.
AvaDent XCL Fully Milled with single and multiple layered teeth or an AvaDent with bonded teeth. Optional custom gum staining and much more.
AvaDent dentures are homogenous and have virtually no monomer. The AvaDent-puck prevents sore spots and results in less “denture breath”.
AvaDent XCL teeth are double cross-linked teeth complete to the core.
AvaDent XCL Fully Milled denture is a monolithic denture without a transition of the tooth and denture base.
A major cause of “denture breath” and sores in traditional dentures is the growth of bacteria that find their way into the prosthesis, mainly due to the porosity of the acrylic denture material. The patented AvaDent process creates a denture that is substantially denser and more homogenous than a traditional prosthesis and therefore is very resistant to the build-up of bacteria. This helps prevent denture odors and sore spots.
As an example you can view the image below. The left figure is an acrylic prosthesis made in the traditional way, while the image on the right is the acrylic prosthesis produced by AvaDent’s patented process. There is significant bacterial growth on the left and almost no bacterial growth on the AvaDent acrylic puck.
Conventionally versus AvaDent processed Diamond D acrylic
Conventionally processed Diamond D acrylic much adhesion of bacteria
AvaDent processed Diamond D acrylic little adhesion of bacteria
For the first time ever, through the power of computer-aided engineering and advances in material production, you are able to provide a fully milled, one piece, denture to your clients. Because the AvaDent denture is milled from a homogeneous puck with contiguous AvaDent XCL (eXtreme Cross-Linked) tooth and base material, the denture is more bio-hygienic and up to 8 times stronger than a conventionally processed denture.
Recent studies at the University of Minnesota show that the XCL mould teeth have better wear resistance than other premium denture teeth on the market. An additional advantage of a fully milled AvaDent is that there is no risk of discoloration of the tooth/base juncture, as the denture is formed from one piece without bonding material. You can choose from a wide variety of tooth moulds and shades.
The XCL-1 is a single layer tooth that has a dentin core.
The XCL-2 has a multiple layered tooth that has a dentin and enamel core with natural morphology. High translucency enamel and dentin core give the XCL-2 great natural esthetics.
XCL wear is compared to other premium tooth manufactures. There were no statistical differences in wear results and some research shows even a better wear resistant actual number for the XCL.
The secret behind the AvaDent Digital Denture is that breakthrough software controls the manufacturing process. The 5-axis milling machine is making the AvaDent out of the pre-shrunk, homogenous AvaDent-puck. So you don’t have any shrinkage of stone models and traditional injection molding. The way your impression “plops” out of the mouth of the patient will be the way the AvaDent has that exceptional fit. In fact, AvaDent doesn’t need a post palatal seal to compensate for poor fitting surfaces; it fits right the first time. Finally, the natural palate of the patient can be copied one-to-one into the denture.
The AvaDent process results in greater fit accuracy than ALL conventional processing techniques.
With AvaDent you can select from different tooth mould manufacturers. So there will always be a tooth line that meets your demands. You can make your own choice of teeth for each individual patient:
Or select the AvaDent XCL teeth line. This is a one-piece denture without any prefabricated teeth bonded in. When you select the XCL-line it is a fully milled denture, including teeth and base. This results in many benefits. Candulor is a brand of Candulor AG. | SR Vivodent are trademarks of Ivoclar Vivadent AG. | Portrait IPN is a trademark of Dentsply International Inc.
AvaDent Digital Dental Solutions keeps innovating to provide you with the best and highest quality materials. Be the first to know if there are new materials available.
Please feel free to contact us if you have any more questions about the AvaDent Materials. Our team is happy to help you and provide you with more detailed information.
AvaDent Digital Dental Solutions provides you with high quality digital dentures. The unique materials result in extremely comfortable dentures and even more unique digital products. For each patient you will find the right product solution.