AvaDent Digital Dental Solutions will exhibit and present at the 33rd annual
LMT LAB DAY Chicago, the largest dental laboratory event in America.
LECTURES WILL BE HELD AT:
The Hyatt Regency • East Tower Bronze Level, Michigan Room 1B
Visit us at Booth #D-41 to see our full line of products and see how we can help you grow your business.
• • • • • • • • • • • • • • • • FEATURING • • • • • • • • • • • • • • • •
“The AvaDent Retread and Accelerset as profitable opportunities
in your removable dental laboratory”
8:00am – 9:00am • Friday Feb. 24th and Saturday Feb. 25th
Stephen F. Balshi, MBE Fort Washington, PA
Course Description: Implant hybrid cases that have been completed over the past few decades offer a tremendous market potential for the dental laboratory. Everyday these prostheses are wearing down and falling apart. Revitalizing these cases using the AvaDent Retread Procedure not only restores the hybrid prostheses to proper function and esthetics but also makes it more durable than when it was originally constructed. The launch of AvaDent Accelerset provides a new fully automated restoration that is not subject to the same occlusal wear as traditional hybrids and is also esthetically far superior to a fully-milled Zirconia prostheses. The implant framework, ceramic crowns and gingiva are all separately milled components assembled prior to delivery to the dental laboratory and ultimately to the patient.
“Why and How I implemented AvaDent into my in-house dental
laboratory with ease, efficiency and profitable results”
9:00am – 10:00am • Friday Feb. 24th and Saturday Feb. 25th
Valerie Cooper, DDS MS Dayton, OH
Course Description: Dr. Cooper will be discussing implementing AvaDent into a general or prosthodontics private practice. In 2015 she began scanning and designing and now almost 100% of her implant and tissue supported complete prostheses are AvaDent made. AvaDent dramatically transformed her in-house lab, and resulted in lower costs, greater control, and clinical improvements. She is sharing insights into how using AvaDent changes your staff needs, training, clinical coding and procedures, and generates referrals.
“The Wagner EZ Guide: AvaDent Digital Dentures with ease, speed, and profitability for
the doctor (3-30 minute appointments offer the AvaDent Recipe for Success)”
10:00am – 11:00am • Friday Feb. 24th and Saturday Feb. 25th
Stephen Wagner, DDS FACP Santa Fe, NM
Course Description: Learn contemporary cutting edge techniques for restoring the edentulous patient. There is a revolution going on in denture making and Dr. Wagner is leading the way. Imagine making an extremely high-quality complete denture in only 3 short thirty minute appointments. The time saved will benefit both you and the patient and improve any clinician’s bottom line. It can be done and Dr. Wagner will show you exactly how to do it – start to finish!
Course Objectives: Following completion of the program, the participant should have the knowledge to:
1. Understand the workflow for a new three appointment denture technique.
2. Prescribe and use implants to support removable and fixed complete dentures.
3. Set up the workflows required to complete implant-based restorations.
4. Organize and implement a simplified but high-quality denture service in a contemporary general dental practice.
“Hybrids and overdentures made simpler, stronger, and more efficiently
– My experience with AvaDent Digital Dentures”
11:00am – 12:00am • Friday Feb. 24th and Saturday Feb. 25th
Samuel M. Strong, DDS Little Rock, AR
Course Description: This presentation will detail the clinician’s journey obtaining predictable results with removable and fixed implant overdentures and All-on-Four Hybrid appliances. A streamlined, practical workflow will be illustrated to improve communication and results for both the dental lab and the prosthetic dentist.
“The AvaDent In-Lab business model “SHARE”: My experience and your opportunity”
12:00pm – 1:00pm • Friday Feb. 24th and Saturday Feb. 25th
Mr. Jeffrey Tolksdorf, President/Owner Olson Dental Laboratory Clinton Township, MI
Course Description: AvaDent “SHARE” brings you a suite of digital dentures, starting with the Advanced Baseplate evolving into the Fully Milled Denture. Application of digital denture technology in the dental laboratory requires advanced equipment and skilled workers. AvaDent “SHARE” gives the lab the opportunity to start at a low entry level while building extensive digital denture experience at a high success rate for dental lab technicians, the clinician and the patient. This course will not only introduce you to AvaDent “SHARE” but also provide a valuable roadmap from entry to successful implementation in your removable lab.
Mr. Rob Lash President Moskey Dental Laboratory Cleveland, OH
Course Description: Rob will discuss his decision to become an AvaDent Partner Lab and the process by which he implemented AvaDent’s digital workflow and processes into his laboratory. Including, how the AvaDent Team has successfully supported, assisted, and guided his staff throughout the process to ensure a successful implementation and profitable outcomes for him and for his clinician’s.
“Working with AvaDent and Dentsply Sirona to grow your removable business”
2:00pm – 3:00pm • Friday Feb. 24th and Saturday Feb. 25th
Michael Suris, AS President Dental Professional Labs, Inc. Merrillville, IN
Course Description: Michael will address and present the exciting and unique business opportunities that are available to the removable lab through the new business agreement between AvaDent and Dentsply/Sirona. Michael’s distinct background, skillset and expertise are an ideal fit to explain and detail the exciting platforms, workflows and options for you and your removable department.
Guillermo J. Molina, DDS Ridgewood, NJ
Course Description: In this lecture Dr. Molina will share his journey through the transition process and the benefits of going digital. You will learn how you can incorporate digital dentistry and the AvaDent lineup of milled, precision prostheses into your practice in order to achieve precision, predictability, and peace with your fixed hybrid cases.
“NextDent, the global leader in dental 3D printing materials presents how you can take immediate advantage of the many amazing 3D printing opportunities in your dental laboratory today”
4:00pm – 5:00pm • Friday Feb. 24th and Saturday Feb. 25th
Mr. Menno Pot, Application Technology Officer NextDent BV, The Netherlands
Course Description: The dynamic world of 3D printing is being fueled by rapid technological advances. NextDent has teamed up with AvaDent Digital Denture Solutions to bring you an exciting 3D printing innovation and many opportunities for your lab:
-The Do’s and Don’ts of 3D printing
-3D printing materials and applications
-3D printing systems (Open vs. Closed)
-Post 3D printing processing(including light boxes)
-3D in-lab printing using AvaDent “SHARE” print files
-The future of 3D printing in-lab